• Home
  • Products
    • Loafing Shed
    • Tack Room/ Garden Shed
    • Mini Barns
    • Build-a-Barn
    • Feeders
    • Panels and Gates
  • Project Gallery
  • Contact Us
  • Financing
  • More
    • Home
    • Products
      • Loafing Shed
      • Tack Room/ Garden Shed
      • Mini Barns
      • Build-a-Barn
      • Feeders
      • Panels and Gates
    • Project Gallery
    • Contact Us
    • Financing
  • Home
  • Products
    • Loafing Shed
    • Tack Room/ Garden Shed
    • Mini Barns
    • Build-a-Barn
    • Feeders
    • Panels and Gates
  • Project Gallery
  • Contact Us
  • Financing

Feeders

Large Square Bale Feeder

This feeder is 6.5'x9.5' with a 24" rail height, designed to make it easy to load a large square bale. With elevated 2x6 floor boards, they are easy to clean and nearly eliminate waste while allowing rain to drain right through. Tow points on all four corners so you can move it, even while fully loaded. 


Turn a corner post into a 5 foot high scratching post with our textured strips for only an additional $100. (Picture shows a feeder optioned with two scratching posts) 

Extremely durable full welded steel frame with brand new materials, not used drill pipe.


$1,500 each 

Scratching post option, $100/ per post (4 max)

$150 off for orders of 3 or more, or when combined with a shelter.

4x4 General Feeder

Designed for horses, this feeder is 4'x4' with a 34" rail height. With 2x6 floor boards they are easy to clean and nearly eliminate waste.

Turn a corner post into a 5 foot high scratching post with our textured strips for only an additional $100. 

 Extremely durable full welded steel frame with brand new materials, not used drill pipe.


$1,000 each 

Scratching post option, $100/ per post (4 max)

$150 off for orders of 3 or more, or when combined with a shelter.

4x6 Covered Feeder

4'x6' with a 34" rail height. Designed for alpacas and horses, these feeders allow you to open a door, toss a few bales in and walk away. With 2x6 floor boards they are easy to clean and nearly eliminate waste. Galvalume roofing keeps the feed dry. Separation bars keep your animals in check. 


Extremely durable full welded steel frame with brand new materials, not used drill pipe.


$1,400 each 

$150 off for orders of 3 or more, or when combined with a shelter.


Panel Feeder

Perfect if you feed large bales, but don't have a way to set a bale into a feeder. These panels are 50" W x 34" H and weigh less than a bag of grain. They connect with pins similar to free standing fence panels. However, they are very heavy duty and designed to take a lot of farmyard punishment. 


These also make excellent fencing panels for your smaller critters, we offer wall and t-post connectors so you can easily hook these to a fence or shelter.


Connect 6 together around a standard round bale or just 4 for small squares. The pins are attached via chain so they won't get lost in the field.


Extremely durable full welded steel frame, we only use brand new materials.


$750 for 6 or $150 individually. Bulk pricing available.

Copyright © 2025 Iron Hart Design - All Rights Reserved.


Powered by

Cookie Selection

We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.

DeclineAccept